| | Sector | abcEducation And Research Institute | Tender Value | INR 6.07 Crore approx. | | Location | Manipur - India | Ref.No | 86723933 | | Closing Date | 27 - Aug - 2025 | | | | Infrastructure development of Oriental College, Takyel, Imphal West, Manipur ,2.0 ,SH A. Construction of Classroom Block cum Academic Building (G + 2) ,Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. ,Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ,Supplying and filling in plinth with sandy soil under floors including, watering, ramming consolidating and dressing complete. ,Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work upto plinth level a) 148 ( 1 Cement 4 coarse sand 8 graded stone aggregate 40 mm nominal size) ,Boring, providing and installation bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc.by percussion drilling using Direct mud circulation (DMC) or Bailer and chisel technique by tripod and mechanical Winch Machine all complete, including removal of excavated earth with all its lifts and leads (length of pile for payment shall be measured up to bottom of pile cap).
Note Truck Mounted rotary/TMR/ Tubewell boring machine shall not be used . a) 450 mm diameter ,Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work upto plinth level (a) 11.53 (1 cement 1.5 coarse sand 3 graded stone aggregate 20 mm nominal size) ,Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. above plinth level upto floor five level excluding cost of centering,shuttering, finishing and reinforcement a) 11.53 (1 cement 1.5 coarse sand 3 graded stone aggregate 20 mm nominal size) ,Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level upto floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with a) 11.53 (1 cement 1.5 course sand 3 graded stone aggrt. 20 mm. nominal size). ,Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. a) Thermo Mechanically Treated Bars ,Centering and shuttering including strutting, propping etc. and removal of form for ,a) Foundations, footings, bases of columns, etc. for mass concrete. ,b) Suspended floors, roofs, landings, balconies and access platform, with water proof ply 12mm thick. ,c) Columns, Pillars, Piers, Abutments, Posts and Struts. ,d) Lintels, beams, plinth beams, girders, bressummers and cantilevers, with water proof ply 12mm thick. ,e) Stairs, (excluding landings) except spiral-staircases. ,Brick work with 1st class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in Cement mortar 14 (1 cement 4 coarse sand) ,Half brick masonry with 1st class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in Cement mortar 1 3 (1 cement 3 coarse sand) ,Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately a) Local best quality Teak wood ,Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Local best quality Teak wood a) 35 mm thick shutters ,Providing and fixing bright finished brass door latch with necessary screws etc. complete 300x16x5 mm ,Providing and fixing bright finished brass tower bolts (barrel type)with necessary screws etc. complete ,i) 250 x 10 mm ,ii) 150 x 10 mm ,Providing and fixing bright finished brass handles with screws etc. complete ,i) 125 mm ,ii) 100 mm ,Providing and fixing bright finis |
|
|
If you are a new user, then please
register, it's Free and then fill the form below.
If you are registered with us, just fill the form below, we will get back to you
shortly.
|
All fileds marked with '*' are compulsary.
|
|
|
|